Create a simple sketch to find similar parts
1/5
1
2|1
3
4
4
0
0
0
0
0
0
0
0
0
0
6049373_Sub TWU 4.04-05-DM-QC-C
1/5
Produktabbildung
PRODUKTABBILDUNG
Article number
ARTICLE_ID
Type code
ARTICLE_NAME
Manufacturer
MANUFACTURER_NAME
Level Of Detail
LOD
Short text
DESCRIPTION_SHORT
Tender text
DESCRIPTION_LONG
Angle to first bolt hole
A2 [mm]
Thickness flange (incl. sealing edge)
B2 [mm]
Diameter bolt hole
D22 [mm]
Diameter sealing edge
D42 [mm]
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
6046682
Sub TWU 4.02-07-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6046683
Sub TWU 4.02-14-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6046684
Sub TWU 4.02-10-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6046685
Sub TWU 4.02-07-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049365
Sub TWU 4.02-20-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049366
Sub TWU 4.04-05-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049367
Sub TWU 4.04-07-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049368
Sub TWU 4.04-09-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049369
Sub TWU 4.04-14-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049372
Sub TWU 4.02-20-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049373
Sub TWU 4.04-05-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049374
Sub TWU 4.04-07-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049375
Sub TWU 4.04-09-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049376
Sub TWU 4.04-14-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049377
Sub TWU 4.04-18-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049378
Sub TWU 4.04-27-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6049379
Sub TWU 4.04-35-DM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6081633
Sub TWU 4.08-05-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
6081634
Sub TWU 4.08-07-EM-QC-C
WILO SE
350
Multistage 4" submersible pump with quick-connecting cable in a jacketed design for vertical and horizontal installation
Fully submersible, multistage submersible pump with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct starting with water-glycol filling. Hermetically sealed with enamel-insulated windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be operated immersed. Horizontal installation must be performed in conjunction with a cooling jacket. For pumping water out of boreholes with a maximum immersion depth of 200 m and a max. sand content of 50 g/m³. The QC version is equipped with a quick-connecting cable for simple and fast replacement of the power cable. Scope of delivery *Hydraulics + motor completely assembled *Quick-connect connection cable, approved for drinking water *Cable ties *Retaining cable made of polypropylene *Clamp for fixing the retaining cable to the unit *Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch *Installation and operating instructions
0
0
0
0.000
| 标准代码 | Sub TWU 4-QC |
| 描述 | |
| 公司 | Wilo |
| 上次修改 | 19.05.2025 12:00:53 |
| 单位 |
Sub TWU 4-QC,,Wilo
CNS
CNSERPBASE Object Properties